Flow Protocols and Services

Search

The Search section allows the search capability based on the following.

• In the Search field, enter text you want to search on. Select Service Profile Name and/or Description and/or Service Category check boxes to perform the search in service profile name and/or description and/or service category column(s) for the text entered after the filter is applied.

• Select the Display services with aggregation port enabled check box to filter on services that have Enable Aggregation Port set to Enable.

• Click the Aggregation Port drop-down and choose from options Equal to, Less than, or Greater than. Enter the port number in the text field to perform the search in the aggregation port column based on the option chosen.

Buttons

• Click Apply Filter button to apply the filter settings.

• Click Clear Filter button to remove all filters and to display all flow services in the list.

• Click on to collapse or to uncollapse the Filter section.

Add / Edit Service Profile

1. Click Add Service Profile to add a service profile or click to edit an existing service profile. Add Service Profile / Edit Service Profile pop-up will appear.
   

2. In the Service Profile Name field, enter the service profile name to appear in reports.

3. In the Description field, enter the service profile description.

4. Click the check box to enable Enable Aggregation Port and enter the port number in Aggregation Port field.

   Enable Aggregation Port check box when enabled,

   • applies the Aggregation Port to aggregated and raw flow data.

   • the application port is rewritten for both aggregated and raw data.

   • aggregated and raw data retain the integrity of the original non-application ports; i.e., source, destination, and client ports.

5. The Service Category drop-down contains a list of SevOne OOTB service categories, SaaS OOTB service categories, a nd custom service categories, if any. You can choose a service category from the list and assign it to the service profile you are adding / modifying.

   A Service Profile can only be assigned to one Service Category.

   
   

6. Click Save.

Delete Selected

Select the check box for each service to be deleted. Click Delete Selected to delete.

Search

From Search drop-down, enable Select All Columns to allow you to search all columns such as, ID, Service Profile Name, Description, Service Category, and Aggregation Port for the text entered in the search box. You have an option to search for text in ID or Service Profile Name or Description or Service Category or Aggregation columns based on the option selected from the Search drop-down.

Add Service

1. Click Add Service to add a service to the service profile selected or click to edit an existing service available to the selected service profile. Add Service / Edit Service pop-up will appear.
   

2. In the Source IP field, enter the source IP address.

3. In the Source Port field, enter the source port number.

4. Select the Unidirectional Service check box to allow service to be unidirectional only. For bidirectional service, disable the check box and configure the following fields.

   1. In the Destination IP field, enter the destination IP address.

   2. In the Destination Port field, enter the destination port number.

5. In the Protocol field, select a protocol from the drop-down list.

6. In the ToS Value field, enter the value for the type of service.

7. Click Save.

Delete Selected

Select the check box for each flow service to be deleted. Click Delete Selected to delete.

Search

From Search drop-down, enable Select All Columns to allow you to search all columns such as, Source IP, Source Port, Unidirectional, Destination IP, Destination Port, Protocol, and ToS Value for the text entered in the search box. You have an option to search for text in Source IP or Source Port or Unidirectional or Destination IP or Destination Port or Protocol or ToS Value columns based on the option selected from the Search drop-down.

Search

The Search section allows the search capability based on the following.

• In the Search field, enter text you want to search on. Select Category Name and/or Description check boxes to perform the search in service category name and/or description column(s) for the text entered after the filter is applied.

Buttons

• Click Apply Filter button to apply the filter settings.

• Click Clear Filter button to remove all filters and to display all flow services in the list.

• Click on to collapse or to uncollapse the Filter section.

Add / Edit Service Category

1. Click Add Service Category to add a service category or click to edit an existing service category. Add Service Category / Edit Service Category pop-up will appear.
   

   Only custom Service Categories can be added. And, existing custom service categories can be modified or deleted.

   SevOne OOTB service categories and SaaS OOTB service categories cannot be modified or deleted.

   Service Profiles assigned to SevOne OOTB service categories can be modified or deleted.

   SaaS Service Profiles assigned to SaaS OOTB service categories cannot be modified or deleted.

   
   

2. In the Service Category Name field, enter the service category name to appear in reports.

3. In the Description field, enter the service category description.

4. Click Save .

Delete Selected

Select the check box for each Service Category to be deleted. Click Delete Selected to delete.

Search

From Search drop-down, enable Select All Columns to allow you to search all columns such as, ID, Service Category Name, and Description for the text entered in the search box. You have an option to search for text in ID or Service Category Name or Description columns based on the option selected from the Search drop-down.

Add Service Profiles

1. Click Add Service Profiles to add a service profile to the selected service category. Add Service Profiles pop-up will appear.
   

   Service Profile can only be added to SevOne OOTB service categories or custom service categories.

   Service Profile can be added to SaaS OOTB service categories.

   
   

2. Click the Service Profiles drop-down and select the service profile you want to map with the selected service category.

3. Click Save.

Remove selected

Select the check box for each service profile to be deleted. Click Remove selected to delete.

Search

From Search drop-down, enable Select All Columns to allow you to search all columns such as, Service Profile Name and Description for the text entered in the search box. You have an option to search for text in Service Profile Name or Description columns based on the option selected from the Search drop-down.